Plastplugg i polyeten for skruemontasje.
For de fleste montasjer der skjærkraften dominerer. Anbefales ikke for montasje i tak - bruk da f.eks TMA.
Brukes i betong, natursten, lettbetong, LECA, hulltegl, tegl og plater.
For at belastningsverdiene som er målt skal være reelle, må skruen gjennom pluggen + minimum 1 gjenge.
| Teknisk informasjon | |
| Tekniske data | Verdi |
| Produktspekter | Thorsman |
| Produkt eller komponent type | Wall plug |
| Kallenavn på utstyr | TP |
| Med utstyr | Uten skrue |
| Device application | Lightweight installation |
| Drilling diameter | 5,5 mm brick |
| 5,5 mm concrete | |
| Drilling depth | >= 25 mm |
| Nail diameter | 3,5...5 mm |
| Materiale | PEHD (polyethylene high density) |
| pratical load capacity | shear: 0.4 kN for solid brick (safety factor:4.5) |
| pull-out load: 0.2 kN for solid brick (safety factor:6) | |
| shear: 0.1 kN for low density concrete 500 and expanded clay (safety factor:4.5) | |
| shear: 0.5 kN for concrete C25 (safety factor:4.5) | |
| pull-out load: 0.25 kN for concrete C25 (safety factor:6) | |
| pull-out load: 0.04 kN for low density concrete 500 and expanded clay (safety factor:6) | |
| shear: 50 kg for concrete C25 (safety factor:4.5) | |
| shear: 40 kg for solid brick (safety factor:4.5) | |
| pull-out load: 25 kg for concrete C25 (safety factor:6) | |
| pull-out load: 20 kg for solid brick (safety factor:6) | |
| shear: 10 kg for low density concrete 500 and expanded clay (safety factor:4.5) | |
| pull-out load: 4 kg for low density concrete 500 and expanded clay (safety factor:6) | |
| Fargenyanse | Gul |
| Ambient air temperature for operation | -50 til 80oC |
| Diameter | 5.5 mm |
| Lengde | 22 mm |
| Antall pr eske | sett a 100 |
| Vekt | 0.00039 kg |
| Dokumenter og filer | |
| Produktmiljøprofil | |
 TP_wall_plugs._Product_Environmental_Profile.pdf879.22 KB |
|
| Plugg TP99.96 KB |
|